Differences

This shows you the differences between two versions of the page.

--- cluster:192 [2020/02/21 15:50]
hmeij07
+++ cluster:192 [2020/02/26 18:25]
hmeij07 [EXX96]
@@ Line 6: / Line 6: @@
 A page for me on how these 12 nodes were build up after they arrived. To make them "ala n37" which as the test node in redoing our K20 nodes, see [[cluster:172|K20 Redo]]
-Page best read bottom to top.
+Page best followed bottom to top.
+==== Usage ====
+The new queue ''exx96'' will be comprised of nodes ''n79-n90''.  Each node holds 4x RTX2080S gpus, 2x Xeon Silver 4214 2.2 Ghz cpus, 96 GB memory and a 1TB SSD. ''/localscratch'' is around 800 GD.
+<code>
+bhosts -l n79
+             gputest gpu4
+ Total             0    3
+ Reserved        0.0  0.1
+lsload -l n79
+HOST_NAME               status  r15s   r1m  r15m   ut    pg    io  ls    it   tmp   swp   mem    gpu
+n79                         ok   0.0   0.0   0.0   0%   0.0     0   0 2e+08  826G   10G   90G    3.0
+mdout.325288:|  Master Total CPU time:          982.60 seconds     0.27 hours  1:1
+mdout.325289:|  Master Total CPU time:          611.08 seconds     0.17 hours  4:2
+mdout.326208:|  Master Total CPU time:          537.97 seconds     0.15 hours 36:4
+#BSUB -n 4
+#BSUB -R "rusage[gpu4=2:mem=6288],span[hosts=1]"
+export CPU_GPU_REQUEST=4:2
+</code>
+==== Miscellaneous ====
+Install scheduler RPM for CentOS7, reconfigure (hosts, queue, static resource), elim. Test it out with old wrapper.
+Edit the n37.openmpi.wrapper for n33-n37 and n79-90 and the one on n78 for the new static resource ''gpu4''.
+Add nodes to ZenOSS hpcmon.
+Propagate global ''known_hosts'' files in users ~/.ssh/ dirs.
+Look at how accounting ties in with resource request ''gpu4='' versus ''gpu='' ...
+<code>
+# propagate global passwd, shadow, group, hosts file
+# add to date_ctt2.sh script, get and set date
+NOW=`/bin/date +%m%d%H%M%Y.%S`
+for i in `seq 79 90`; do echo n$i; ssh n$i date $NOW; done
+# crontab
+# ionice gaussian
+,15,30,45 * * * * /share/apps/scripts/ionice_lexes.sh  > /dev/null 2>&1
+# cpu temps
+* * * * /share/apps/scripts/lm_sensors.sh > /dev/null 2>&1
+# rc.local, chmod o+x /etc/rc.d/rc.local, then add
+# for mapd, 'All On' enable graphicsrendering support
+#/usr/bin/nvidia-smi --gom=0
+# for amber16 -pm=ENABLED -c=EXCLUSIVE_PROCESS
+#nvidia-smi --persistence-mode=1
+#nvidia-smi --compute-mode=1
+# for mwgpu/exx96 -pm=ENABLED -c=DEFAULT
+nvidia-smi --persistence-mode=1
+nvidia-smi --compute-mode=0
+# turn ECC off (memory scrubbing)
+#/usr/bin/nvidia-smi -e 0
+# lm_sensor
+modprobe coretemp
+modprobe tmp401
+#modprobe w83627ehf
+reboot
+</code>
 ==== Recipe ====
@@ Line 205: / Line 285: @@
 {{:cluster:ssd_small.JPG?nolink&300|}} Yea, found 1T SSD \\
-{{:cluster:hdmi_small.JPG?nolink&300|}} HDMI ports on gpu \\
+{{:cluster:hdmi_small.JPG?nolink&300|}} ports on gpu \\
 {{:cluster:gpu_small.JPG?nolink&300|}} GPU detail, blower model \\
 {{:cluster:back_small.JPG?nolink&300|}} Back, gpus stacked 2 on 2 \\

DokuWiki

User Tools

Site Tools

Differences

Page Tools