This shows you the differences between two versions of the page.
Both sides previous revision Previous revision Next revision | Previous revision Next revision Both sides next revision | ||
cluster:194 [2020/03/23 15:28] hmeij07 [Summary] |
cluster:194 [2020/11/23 16:37] hmeij07 [fndebug] |
||
---|---|---|---|
Line 5: | Line 5: | ||
Notes. Mainly for me but might be useful/of interest to users. | Notes. Mainly for me but might be useful/of interest to users. | ||
+ | |||
+ | Message: | ||
+ | |||
+ | Our current file server is sharptail.wesleyan.edu which serves out home directories (/home, 10T). A new file server hpcstore.wesleyan.edu will be deployed taking over this function (/zfshomes, 190T). This notice is to inform you your home directory has been cut over. | ||
+ | |||
+ | There are no changes for you. When you log into cottontail or cottontail2 you end up in your new home directory. $HOME and ~username work as usual. The only difference is that your old home was at / | ||
+ | |||
+ | If you wish to load/unload large content from your new home directory please log into hpcstore.wesleyan.edu directly (via ssh/sftp) or preferably use rsync with a bandwidth throttle no larger than " | ||
+ | |||
+ | Details at\\ | ||
+ | https:// | ||
==== Summary ==== | ==== Summary ==== | ||
Line 57: | Line 68: | ||
* **SMB/ | * **SMB/ | ||
+ | * all users have shares but not class accounts (hpc101-hpc200) | ||
+ | |||
+ | Not any more. Serious conflict between NFS and SMB ACLs if both protocols enabled on same dataset. So **nobody** has a samba share. If you want to drop& | ||
+ | |||
+ | --- // | ||
< | < | ||
Line 73: | Line 89: | ||
==== Consoles ==== | ==== Consoles ==== | ||
- | port 5, 11, web site (with shell) | + | * port 5 |
+ | * set up mac | ||
+ | * plug in pin2usb cable (look for device / | ||
+ | * launch terminal, invoke screen | ||
+ | * screen / | ||
+ | * sysadmin/ | ||
+ | * ifconfig ehto | grep 'inet addr' or | ||
+ | * ipmitool -H 127.0.0.1 -U admin -P admin lan print | ||
+ | * ipmitool -H 127.0.0.1 -U admin -P admin lan set 1 ipaddr ... (etc + netmask + defgw) | ||
+ | * to set initial ips/ | ||
+ | * port 10 (if 12 option netcli boot menu does not show) | ||
+ | * unplug console cable, plug in pin2serial cable | ||
+ | * set up windows laptop, launch hyperterminal, | ||
+ | * 12 menu '' | ||
+ | * port 80->443, web site (with shell of '' | ||
+ | * gui | ||
+ | * shell | ||
+ | * all non-zfs commands are persistent across boots | ||
+ | * except ssh keys and directory permissions | ||
==== HA ==== | ==== HA ==== | ||
Line 204: | Line 238: | ||
==== SMB ==== | ==== SMB ==== | ||
- | SMB/CIFS (Samba) shares are also created once the homedir is up. | + | SMB/CIFS (Samba) shares are also created once the homedir is up. NOT! |
+ | |||
+ | * do not mix SMB and NFS on same dataset, not supported | ||
+ | * problems ' | ||
+ | * windows ACLs on top of unix file system = bad | ||
+ | |||
+ | < | ||
+ | |||
+ | # v that plus is the problem | ||
+ | drwxr-xr-x+ 147 root wheel 147 Apr 27 08:17 / | ||
+ | |||
+ | # either use ACL editor to strip off in v13.1-U2 or | ||
+ | |||
+ | setfacl -bn / | ||
+ | |||
+ | followed by for example | ||
+ | |||
+ | find / | ||
+ | |||
+ | # also unsupported via shell | ||
+ | |||
+ | </ | ||
* For each user | * For each user | ||
Line 212: | Line 268: | ||
* ''/ | * ''/ | ||
- | **Note** At user creation a random password is set. Please ask to have it reset to access SMB shares. (there should be some self-serve password reset functionality with email confirmation but I cannot find it for now. | + | **Note** At user creation a random password is set. Please ask to have it reset to access SMB shares. (there should be some **self-serve password reset** functionality with email confirmation but I cannot find it for now. Any passwords changed outside of database will not be persistent across boots. |
< | < | ||
Line 294: | Line 350: | ||
</ | </ | ||
+ | ==== Update ==== | ||
+ | |||
+ | **Change the Train** to 11.3, then you will apply the update first in the WebUI to the passive controller. | ||
+ | |||
+ | After its reboots, you will failover to it by **rebooting** the Active controller (the **current** WebUI). | ||
+ | |||
+ | This will failover to the updated 11.3-U2.1 controller (brief interruption). | ||
+ | |||
+ | From there, you would go to System > Update and do the same for the NEW passive controller. | ||
+ | |||
+ | After that initiate failover back to primary via dashboard (brief interruption). | ||
+ | |||
+ | Enable HA, click icon | ||
+ | |||
+ | **Apply Pending Updates** | ||
+ | Upgrades both controllers. Files are downloaded to the Active Controller and then transferred to the Standby Controller. The upgrade process starts concurrently on both TrueNAS Controllers. | ||
+ | |||
+ | Server responds while HA disabled. | ||
+ | |||
+ | Update takes 15 mins in total. | ||
+ | |||
+ | ** 11.3 U5 ** | ||
+ | |||
+ | * Check for Updates, read release Notes, schedule support ticket if needed (major update) | ||
+ | * Apply Pending update, save configuration, | ||
+ | * active/ | ||
+ | * At 100% stanby reboots, HA disables, file system ok | ||
+ | * Check version on standby, Initiate Fail Over (interrupts file system) | ||
+ | * Login, hyou end up on updated, now active server | ||
+ | * Logout/ | ||
+ | * Wait for HA to be enabled, check version on new standby | ||
+ | ==== HDD ==== | ||
+ | |||
+ | Two types, hard to find in stock. | ||
+ | |||
+ | < | ||
+ | |||
+ | | ||
+ | |||
+ | 8T SAS | ||
+ | da0: <HGST HUS728T8TAL4201 B460> Fixed Direct Access SPC-4 SCSI device | ||
+ | da0: Serial Number VAKM5GTL | ||
+ | da0: 1200.000MB/ | ||
+ | da0: Command Queueing enabled | ||
+ | da0: 7630885MB (1953506646 4096 byte sectors) | ||
+ | exxactcorp | ||
+ | https:// | ||
+ | | ||
+ | 800G SSD | ||
+ | da2: <WDC WUSTR6480ASS201 B925> Fixed Direct Access SPC-5 SCSI device | ||
+ | da2: Serial Number V6V1XGDA | ||
+ | da2: Command Queueing enabled | ||
+ | da2: 763097MB (1562824368 512 byte sectors) | ||
+ | exxactcorp | ||
+ | https:// | ||
+ | |||
+ | </ | ||
+ | |||
+ | ==== Logs ==== | ||
+ | |||
+ | From support: | ||
+ | |||
+ | That information is logged via syslog for the opposite controller. For example, to find the information I did here, I looked in the syslog output on the controller that was passive at the time these alerts occurred. | ||
+ | |||
+ | You can look that information up yourself by opening an SSH session to the passive controller, navigating to the / | ||
+ | |||
+ | |||
+ | ==== Split Brain ==== | ||
+ | |||
+ | When ending up with an error fail over state try console shutdown first. If that does not work cut power to controllers. | ||
+ | |||
+ | ==== fndebug ==== | ||
+ | |||
+ | * first log into support, then download teamviewer | ||
+ | * https:// | ||
+ | * get.teamviewer.com/ | ||
+ | |||
+ | |||
+ | **Manual debug file creation**, then ftp to ftp.ixsystems.com | ||
+ | |||
+ | < | ||
+ | |||
+ | freenas-debug -A | ||
+ | tar czvf fndebug-wesleyan-20201123.tar.gz / | ||
+ | |||
+ | # next look at bottom of fndebug/ | ||
+ | /dev/da10 HGST: | ||
+ | /dev/da9 HGST: | ||
+ | # these drives have not failed yet ut have write errors, offline/ | ||
+ | |||
+ | # next look at output of zpool status -x in fndebug/ | ||
+ | # and the error code | ||
+ | # https:// | ||
+ | |||
+ | NAME STATE READ WRITE CKSUM | ||
+ | tank DEGRADED | ||
+ | ... | ||
+ | raidz2-1 | ||
+ | gptid/ | ||
+ | # look for checksums that have failed like this disk in vdev raidz2-1 | ||
+ | |||
+ | # clean up the spare that resilvered (INUSE status) | ||
+ | # then run a clear on the pool. Then we'll try to get another debug. | ||
+ | |||
+ | zpool detach tank gptid/ | ||
+ | zpool clear tank | ||
+ | |||
+ | # that brought all drives back online and the vdevs show | ||
+ | |||
+ | </ | ||
+ | |||
+ | * Monitor the progress of the resilvering operation: 'zpool status -x' | ||
+ | |||
+ | |||
+ | **Replace a failed drive** | ||
+ | |||
+ | < | ||
+ | |||
+ | 1) Go into the Storage > Pools page. Click the Gear icon next to the pool and press the " | ||
+ | 2) Find da10 and press the three-dot options button next to it, then press " | ||
+ | 3) Go to the System > View Enclosure page, select da10 and press " | ||
+ | 4) Physically swap the drive on the rack with its replacement. | ||
+ | 5) Go back to the Storage > Pool > Status page, bring up the options for the removed drive, and press " | ||
+ | 6) Wait for the drive to finish resilvering before proceeding to replace da9. | ||
+ | |||
+ | </ | ||
\\ | \\ | ||
**[[cluster: | **[[cluster: | ||