cluster:194
Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision Next revision | Previous revision Next revision Both sides next revision | ||
|
cluster:194 [2020/03/24 08:15] hmeij07 [Summary] |
cluster:194 [2020/04/28 09:02] hmeij07 |
||
|---|---|---|---|
| Line 5: | Line 5: | ||
| Notes. Mainly for me but might be useful/of interest to users. | Notes. Mainly for me but might be useful/of interest to users. | ||
| + | |||
| + | Message: | ||
| + | |||
| + | Our current file server is sharptail.wesleyan.edu which serves out home directories (/home, 10T). A new file server hpcstore.wesleyan.edu will be deployed taking over this function (/zfshomes, 190T). This notice is to inform you your home directory has been cut over. | ||
| + | |||
| + | There are no changes for you. When you log into cottontail or cottontail2 you end up in your new home directory. $HOME and ~username work as usual. The only difference is that your old home was at / | ||
| + | |||
| + | If you wish to load/unload large content from your new home directory please log into hpcstore.wesleyan.edu directly (via ssh/sftp) or preferably use rsync with a bandwidth throttle no larger than " | ||
| + | |||
| + | Details at\\ | ||
| + | https:// | ||
| ==== Summary ==== | ==== Summary ==== | ||
| Line 75: | Line 86: | ||
| * port 5 | * port 5 | ||
| - | * plug in pin2usb cable | + | |
| - | * set up mac, launch terminal, invoke screen | + | |
| + | * launch terminal, invoke screen | ||
| + | * screen / | ||
| + | * sysadmin/ | ||
| + | * ifconfig ehto | grep 'inet addr' or | ||
| + | * ipmitool -H 127.0.0.1 -U admin -P admin lan print | ||
| + | * ipmitool -H 127.0.0.1 -U admin -P admin lan set 1 ipaddr ... (etc + netmask + defgw) | ||
| * to set initial ips/ | * to set initial ips/ | ||
| - | * port 11 | + | * port 10 (if 12 option netcli boot menu does not show) |
| * unplug console cable, plug in pin2serial cable | * unplug console cable, plug in pin2serial cable | ||
| - | * set up windows laptop, launch hyperterminal | + | * set up windows laptop, launch hyperterminal, baud rate 115000 |
| - | * 12 menu '' | + | * 12 menu '' |
| * port 80->443, web site (with shell of '' | * port 80->443, web site (with shell of '' | ||
| * gui | * gui | ||
| * shell | * shell | ||
| * all non-zfs commands are persistent across boots | * all non-zfs commands are persistent across boots | ||
| - | * except ssh keys and permissions | + | * except ssh keys and directory |
| ==== HA ==== | ==== HA ==== | ||
| Line 306: | Line 323: | ||
| </ | </ | ||
| + | |||
| + | ==== Update ==== | ||
| + | |||
| + | Change the Train to 11.3, then you will apply the update first in the WebUI to the passive controller. | ||
| + | |||
| + | After its reboots, you will failover to it by **rebooting** the Active controller (the **current** WebUI). | ||
| + | |||
| + | This will failover to the updated 11.3-U2.1 controller (brief interruption). | ||
| + | |||
| + | From there, you would go to System > Update and do the same for the NEW passive controller. | ||
| + | |||
| + | After that initiate failover back to primary via dashboard (brief interruption). | ||
| + | |||
| + | Enable HA, click icon | ||
| + | |||
| \\ | \\ | ||
cluster/194.txt · Last modified: 2024/01/03 13:50 by hmeij07
Page Tools
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
