DokuWiki

User Tools

Site Tools

Trace:
cluster:89

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision 		Previous revision
Next revision Both sides next revision
cluster:89 [2010/08/17 17:41]
hmeij 		cluster:89 [2010/08/17 18:42]
hmeij
Line 38: Line 38:
   * eth1, data/private, 10.10.102.254/255.255.0.0 (greentail-eth1, should go to ProCurve 2610)   * eth1, data/private, 10.10.102.254/255.255.0.0 (greentail-eth1, should go to ProCurve 2610)
   * eth2, public, 129.133.1.226/255.255.255.0 (greentail.wesleyan.edu)   * eth2, public, 129.133.1.226/255.255.255.0 (greentail.wesleyan.edu)
-  * eth3, ipmi, 192.168.103.254/255.255.0.0,  (greentail-ipmi, should go to better switch ProCurve 2910, do later)+  * eth3 (over eth2), ipmi, 192.168.103.254/255.255.0.0,  (greentail-ipmi, should go to better switch ProCurve 2910, do later) 
 +    * see discussion iLo/IPMI under CMU
   * ib0, ipoib, 10.10.103.254/255.255.0.0 (greentail-ib0)   * ib0, ipoib, 10.10.103.254/255.255.0.0 (greentail-ib0)
   * ib1, ipoib, 10.10.104.254/255.255.0.0 (greentail-ib1, configure, might not have cables!, split traffic across ports?)   * ib1, ipoib, 10.10.104.254/255.255.0.0 (greentail-ib1, configure, might not have cables!, split traffic across ports?)
Line 74: Line 75:
     * eth1, data/private, 10.10.102.25(increment by 1)/255.255.0.0 (hp000-eth1, should go to ProCurve 2610)     * eth1, data/private, 10.10.102.25(increment by 1)/255.255.0.0 (hp000-eth1, should go to ProCurve 2610)
     * eth2, ipmi, 192.168.103.25(increment by 1)/255.255.0.0, (hp000-ipmi, should go to better switch ProCurve 2910, do later)     * eth2, ipmi, 192.168.103.25(increment by 1)/255.255.0.0, (hp000-ipmi, should go to better switch ProCurve 2910, do later)
 +      * see discussion iLo/IPMI under CMU
     * ib0, ipoib, 10.10.103.25(increment by 1)/255.255.0.0 (hp000-ib0)     * ib0, ipoib, 10.10.103.25(increment by 1)/255.255.0.0 (hp000-ib0)
     * ib1, ipoib, 10.10.104.25(increment by 1)/255.255.0.0 (hp000-ib1, configure, might not have cables!)     * ib1, ipoib, 10.10.104.25(increment by 1)/255.255.0.0 (hp000-ib1, configure, might not have cables!)
Line 100: Line 102:
     * configure automatic event handling     * configure automatic event handling
  
-  * Cluster Management Utility (CMU)+  * Cluster Management Utility (CMU)[[http://h20338.www2.hp.com/HPC/cache/412128-0-0-0-121.html|HP Link]] (Getting Started - Hardware Preparation, Setup and Install, Users Guides) 
 +  * iLo/IPMI 
 +    * HP iLo probably removes the need for IPMI, consult [[http://en.wikipedia.org/wiki/HP_Integrated_Lights-Out|External Link]], do the blades have a management card? 
 +    * well maybe not, IPMI ([[http://en.wikipedia.org/wiki/Ipmi|External Link]]) can be scripted to power on/off, not sure about iLo (all web based)  
 +    * is head node the Management server? possibly, needs access to provision and public networks 
 +    * we may need a iLo subnet ... 192.198.
     * install, configure, monitor     * install, configure, monitor
     * golden image capture, deploy (there will initially only be one image)     * golden image capture, deploy (there will initially only be one image)
cluster/89.txt · Last modified: 2010/11/22 19:05 by hmeij

Page Tools

Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
CC Attribution-Share Alike 4.0 International Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki