Differences

This shows you the differences between two versions of the page.

--- cluster:143 [2015/08/10 18:39]
hmeij [Warewulf Statefull]
+++ cluster:143 [2015/12/10 20:36] (current)
hmeij [Warewulf Statefull]
@@ Line 1: / Line 1: @@
+\\
+**[[cluster:0|Back]]**
 \\
 **[[cluster:0|Back]]**
@@ Line 24: / Line 27: @@
 ) Be sure you're configuring BOOTLOADER, DISKPARTITION,
 DISKFORMAT, and FILESYSTEMS
 ) Have the node PXE boot. Once it has provisioned, set bootlocal to 1:
-         # wwsh provision set --bootlocal=1 [node]
+  * wwsh provision set --bootlocal=EXIT [node]
 ) Reboot node. Still with PXE as the first boot device. The PXE
 config file causes it to boot off hard drive instead of image if
 bootlocal is set. So, it "should" be booting of the HDD.
+Update: Finally got back to this project. Just making notes here as I'm not going to pursue this. Building up a VNFS is tedious. I'd rather build up a server and then grab a ''golden image''. So I'm going to pursue that angle.  Stateless provisioning would be useful for me in the future with many node deployments of simple compute servers.  [[cluster:139|Warewulf Stateless]]
+ --- //[[hmeij@wesleyan.edu|Meij, Henk]] 2015/12/04 14:00//
 \\
 **[[cluster:0|Back]]**

DokuWiki