Differences

This shows you the differences between two versions of the page.

--- cluster:226 [2024/09/17 14:43]
hmeij07
+++ cluster:226 [2024/09/17 14:53] (current)
hmeij07
@@ Line 5: / Line 5: @@
 Notes on the deployment and production changes on our 500T IXsystem m40ha storage appliance.
+Fixed the date on controllers by pointing ntpd to 129.133.1.1
+ES 60 middle amber light blinking which is ''ok'', green health check on right
+  * SAS ports A1 and B1 green led
+Verifies read and write caches (but do not remeber where...)
+As opposed to the X series the 1G truenas mgnt port is not used
+cyclic message was duplicate VHIDs
+==== summary ====
+ To recap we were able to verify that the issue with the x20 webUI not loading after the M40 was plugged in was due to duplicate VHIDs. Once that was changed we saw the issue resolve. We also verified that read and write drives showed as healthy as well as the pool and HA were all enabled and healthy. From there we setup our other network interface and then created our NFS share. Next we configured our NFS share to be locked down to certain hosts and Networks and then setup a replication task from your X series to your new M series for the NFS shares.
 ==== replication ====

DokuWiki