DokuWiki

User Tools

Site Tools

Trace: • usg_intern • 109 • 182 • 83 • 153 • 35 • 92 • 193 • tmp
cluster:84

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
cluster:84 [2010/05/03 13:36] – hmeijcluster:84 [2010/05/03 14:42] (current) – hmeij
Line 21: Line 21:
 Support for OCS, Platform's Open Cluster Manager - Dell Edition for 3 years is $10,434.  I think we can do without, we could always fall back to CentOS/Lava.  Plus we can peruse their knowledhge base which is rather good.  LSF licenses are perpetual so we're good there. Support for OCS, Platform's Open Cluster Manager - Dell Edition for 3 years is $10,434.  I think we can do without, we could always fall back to CentOS/Lava.  Plus we can peruse their knowledhge base which is rather good.  LSF licenses are perpetual so we're good there.
  
-The Infiniband, Force10 gigE and Dell Powerconnect gigE switches we'll leave unsupported too.  If we need switches we can steal them from the sharptail cluster (HP ProCurve 2748 gigE).  Probably cheaper to just buy a new switch if they break.+The Infiniband, Force10 gigE and Dell Powerconnect gigE switches we'll leave unsupported too.  If we need gigE switches we can steal them from the sharptail cluster (HP ProCurve 2748 gigE).  Probably cheaper to just buy a new switch if they break. A 12 port Infiniband switch is probably $3,200 and a 48 port gigE switch about $1,750.
  
  
Line 33: Line 33:
 We probably should have one of each on hand.  If a server dies, for whatever reason, the spare can be put in place, and more spare parts are generated (minus the failed part). We probably should have one of each on hand.  If a server dies, for whatever reason, the spare can be put in place, and more spare parts are generated (minus the failed part).
  
-We probably do not need to be prepared to replace a failed MD1000 enclosure and can decide on that when it happens.  We do need some spare disks, say 3 of them ($750).+We probably do not need to be prepared to replace a failed MD1000 enclosure and can decide on that when it happens.  We do need some spare disks, say 2 of them ($750).
  
-Power fans are the most likely to go, so purchase 10 of them ($500)?  (That contains 4 fans for the servers in the ehwfd queue which currently have a single power source, leaving 6 spares). +Power fans are the most likely to go, so purchase 10 of them ($1500)?  (That contains 4 fans for the servers in the ehwfd queue which currently have a single power source, leaving 6 spares). 
  
-The DIY proposal is then to spend roughly $6,000 now, as a starting point.  Or spend it when things go awry, depends. +The DIY proposal is then to spend roughly $10K now, as a starting point.  Or spend it when things go awry, depends. 
  
 Or downsize the cluster when things go awray, anticipating the new cluster.  Petaltail and Swallowtail could take over each other's services but it would take time, and be disruptive if it is Petaltail. Rebuilding Petaltail would imply wiping Swallowtail, and afterwards, reinstalling/relicensing commercial software. Or downsize the cluster when things go awray, anticipating the new cluster.  Petaltail and Swallowtail could take over each other's services but it would take time, and be disruptive if it is Petaltail. Rebuilding Petaltail would imply wiping Swallowtail, and afterwards, reinstalling/relicensing commercial software.
Line 68: Line 68:
 ==== Dell ==== ==== Dell ====
  
-Turns out Dell does sell refurbished hardware, so let's see what the price tag is for:+Turns out Dell does sells refurbished hardware, so let's see what the price tag is for:
  
-Q=1 PE2950 Stag=GTC2CC1  Ecode=366602301169\\ +Q=1 PE2950 Stag=GTC2CC1  Ecode=366602301169 - $3,087.87 (last cluster quote new $ 6,810)\\ 
-perc5/6 - raid 1 with dual 80 gb 7.2KRPM SATA, 8x1gb dimms, DVD-rom, extra dual-port NIC card, rails if you have, dual power supplies +perc5/6 - raid 1 with dual 80 gb 7.2KRPM SATA, 8x1gb dimms, DVD-rom, extra dual-port NIC card, rails if you have, dual power supplies\\ 
- +Q=1 PE1950 Stag=B1VQBC1 Ecode=24058367713 - $ 1,597.91 (last cluster quote new $ 4,170)\\ 
-Q=1 PE1950 Stag=B1VQBC1 Ecode=24058367713\\ +perc5/6 - no raid, dual 80 gb 7.2KRPM SATA, 8x1gb dimms, rails if you have, dual power supplies \\ 
-perc5/6 - no raid, dual 80 gb 7.2KRPM SATA, 8x1gb dimms, rails if you have, dual power supplies  +Q=1 PE1950 Stag=BYGPBC1  Ecode=26028510625 - $ 2,113.90\\ 
- +perc5/6 - no raid, dual 80 gb 7.2KRPM SATA, 8x2gb dimms, rails if you have, dual power supplies \\ 
-Q=1 PE1950 Stag=BYGPBC1  Ecode=26028510625\\ +total $6,799.98 (this includes $900 in rapid rails (3) so we can pre-mount them)
-perc5/6 - no raid, dual 80 gb 7.2KRPM SATA, 8x2gb dimms, rails if you have, dual power supplies +
  
 Q=4 MD1000 disks Stag=F5TZBC1 Ecode=33004422433\\ Q=4 MD1000 disks Stag=F5TZBC1 Ecode=33004422433\\
-currently have 36gb drives but may substitute 73gb or whatever, 15K RPM SAS+currently have 36gb drives but may substitute 73gb or whatever, 15K RPM SAS\\ 
 +146gb 15k rpm quotes at $ 346.99, get two for $ 693.98
  
-Q=1 Power Connect 2748  Stag=9730SB1 \\ +<del>Q=1 Power Connect 2748  Stag=9730SB1 \\ 
-48 ports, gigE switch, dual power (not sure it is?)+48 ports, gigE switch, dual power (not sure it is?)</del>
  
 ... the rest are parts if you have those, otherwise i might just get more servers as defined above ... ... the rest are parts if you have those, otherwise i might just get more servers as defined above ...
  
 +<del>
 Q=2 Infiniband card + cable (if you have)\\ Q=2 Infiniband card + cable (if you have)\\
-CISCO 4XIB CBL 3M-SUPERFLEX (A0636919) + CISCO STD PCI-e HCA 2PT-TALL BRKT 128MB ROHS (A0664392) (Infiniband card & cable)+CISCO 4XIB CBL 3M-SUPERFLEX (A0636919) + CISCO STD PCI-e HCA 2PT-TALL BRKT 128MB ROHS (A0664392) (Infiniband card & cable)</del>\\ 
 +we have a spare HBA card plus cable (came out of old io-node) 
  
-Q=2 Ethernet card (if you have)\\ +Q=2 Dual port Embedded Broadcom NetXtreme II 5708 Gigabit Ethernet NIC - $ 219.98\\ 
-Dual Embedded Broadcom NetXtreme II 5708 Gigabit Ethernet NIC+(single port card quoted, should be dual, looking PE2950 price is $ 599.99)
  
-Q=8 1gb DIMM for PE1950\\ +Q=8 1gb DIMM for PE1950 - $ 503.96\\ 
-Q=8 2gb DIMM for PE1950\\ +Q=8 2gb DIMM for PE1950 - $ 879.96\\ 
-Q=2 Redundant Power Supply with Dual Cords for PowerEdge 2950\\  +Q=2 Redundant Power Supply with Dual Cords for PowerEdge 2950 $ 599.98\\  
-Q=10 Redundant Power Supply with Y-Cord for PowerEdge 1950\\+Q=10 Redundant Power Supply with Y-Cord for PowerEdge 1950 - $1599.90\\ 
 +total 
  
 +Grand total: $6,799.98 + $ 693.98 + $ 599.99 + $ 3,583.80 = $ 11,677.75 or $12K as expected.
 \\ \\
 **[[cluster:0|Back]]** **[[cluster:0|Back]]**
cluster/84.1272893818.txt.gz · Last modified: by hmeij