cluster:89
Differences
This shows you the differences between two versions of the page.
| Both sides previous revisionPrevious revisionNext revision | Previous revision | ||
| cluster:89 [2010/08/19 15:30] – hmeij | cluster:89 [2010/11/22 19:05] (current) – hmeij | ||
|---|---|---|---|
| Line 28: | Line 28: | ||
| * x.y.z.254 is head or log in node | * x.y.z.254 is head or log in node | ||
| * x.y.z.0 is gateway | * x.y.z.0 is gateway | ||
| - | * x.y.z.<25 is for all switches and console ports | + | * x.y.z.<10 is for all switches |
| - | * x.y.z.25( up to 253) is for all compute nodes | + | * x.y.z.10(up to 253) is for all compute nodes |
| We are planning to ingest our Dell cluster (37 nodes) and our Blue Sky Studios cluster (130 nodes) into this setup, hence the approach. | We are planning to ingest our Dell cluster (37 nodes) and our Blue Sky Studios cluster (130 nodes) into this setup, hence the approach. | ||
| Netmask is, finally, 255.255.0.0 (excluding public 129.133 subnet). | Netmask is, finally, 255.255.0.0 (excluding public 129.133 subnet). | ||
| + | |||
| + | ---- | ||
| + | |||
| + | Update with the following: | ||
| + | Hi Shanna, ok, i see that, so globally lets go with | ||
| + | |||
| + | eth0 192.168.102.x/ | ||
| + | eth1 10.10.102.x/ | ||
| + | eth2 129.133.1.226 public (wesleyan.edu)\\ | ||
| + | eth3 192.168.103.x/ | ||
| + | eth4 192.168.104.x/ | ||
| + | ib0 10.11.103.x/ | ||
| + | ib1 10.11.104.x/ | ||
| + | |||
| + | where x=254 for head and x=10(increment by 1) for nodes n1-n32 | ||
| + | |||
| + | does that work for you? i'm unsure how ilo/ipmi works but it could use eth0. | ||
| + | |||
| + | -Henk | ||
| + | |||
| + | |||
| + | ---- | ||
| + | |||
| + | |||
| + | |||
| + | ===== Infiniband ===== | ||
| + | |||
| + | [[http:// | ||
| + | |||
| + | * Voltaire 4036 | ||
| + | * 519571-B21 | ||
| + | * Voltaire InfiniBand 4X QDR 36-Port Managed Switch | ||
| + | |||
| + | |||
| + | Configuration, | ||
| ===== DM380G7 ===== | ===== DM380G7 ===== | ||
| - | [[http:// | + | [[http:// |
| + | [[http:// | ||
| * Dual power (one to UPS, one to utility, do later) | * Dual power (one to UPS, one to utility, do later) | ||
| Line 45: | Line 81: | ||
| * eth1, data/ | * eth1, data/ | ||
| * eth2, public, 129.133.1.226/ | * eth2, public, 129.133.1.226/ | ||
| - | * eth3 (over eth2), ipmi, 192.168.103.254/ | + | * eth3 (over eth0), ipmi, 192.168.103.254/ |
| * see discussion iLo/IPMI under CMU | * see discussion iLo/IPMI under CMU | ||
| * ib0, ipoib, 10.10.103.254/ | * ib0, ipoib, 10.10.103.254/ | ||
| Line 54: | Line 90: | ||
| * /snapshot mount point for snapshot volume ~ 10tb | * /snapshot mount point for snapshot volume ~ 10tb | ||
| * /sanscratch mount point for sanscratch volume ~ 5 tb | * /sanscratch mount point for sanscratch volume ~ 5 tb | ||
| - | * logical volume LOCALSCRATCH: | + | * / |
| * logical volumes ROOT/ | * logical volumes ROOT/ | ||
| Line 78: | Line 114: | ||
| [[http:// | [[http:// | ||
| - | * node names hp000, increment by 1 | + | * node names n0, increment by 1 |
| - | * eth0, provision, 192.168.102.25(increment by 1)/ | + | * eth0, provision, 192.168.102.10(increment by 1)/ |
| - | * do we need an iLo eth? in range 192.168.104.25(increment by 1) | + | * do we need an iLo eth? in range 192.168.104.10(increment by 1) |
| * CMU wants eth0 on NIC1 and PXEboot | * CMU wants eth0 on NIC1 and PXEboot | ||
| - | * eth1, data/ | + | * eth1, data/ |
| - | * eth2 (over eth1), ipmi, 192.168.103.25(increment by 1)/ | + | * eth2 (over eth0), ipmi, 192.168.103.10(increment by 1)/ |
| * see discussion iLo/IPMI under CMU | * see discussion iLo/IPMI under CMU | ||
| - | * ib0, ipoib, 10.10.103.25(increment by 1)/ | + | * ib0, ipoib, 10.10.103.10(increment by 1)/ |
| - | * ib1, ipoib, 10.10.104.25(increment by 1)/ | + | * ib1, ipoib, 10.10.104.10(increment by 1)/ |
| * /home mount point for home directory volume ~ 10tb (contains / | * /home mount point for home directory volume ~ 10tb (contains / | ||
| Line 154: | Line 190: | ||
| * Lava. Install from source and evaluate. | * Lava. Install from source and evaluate. | ||
| + | |||
| + | * Location | ||
| + | * remove 2 BSS racks (to pace.edu?), rack #3 & 4 | ||
| + | * add an L6-30 if needed (have 3? check) | ||
| + | * fill remaining 2 BSS racks with 24gb good servers, turn off | ||
| \\ | \\ | ||
| **[[cluster: | **[[cluster: | ||
cluster/89.1282231824.txt.gz · Last modified: by hmeij