Monitor

Date: obvious.
Host: obvious.

#Scratch/#vTapes: number of 100% available tapes over total tapes (~~get from NA gui~~, get via TSM q libv).

#NodesDSS/Total: select distinct(node) from wesweb.bs_nodes_vtl where desktop in ('bjackson','dtlee','hepstein','jhammond','jkamm','pdean','shill') … 873/1,108 total on blackhawk (5/20/09)

TSM Est Capacity, TSM Pct Util: q stg VTLBPOOL, add f=d to get allowed/max. If these last 2 are not equal, the capacity changes between TSM & NetApp.

NA Capacity Allocated, NA Data Written: per library (get from NA gui).

We can now check the "Maximum Scratch Volumes allowed" parameter for this storage pool using the following command.

q stg BACKUP_POOL f=d

This value will need to be greater than the parameter "Number of Scratch Volumes Used".

To increase this maximum scratch volumes allowed in the stgpool "BACKUP_POOL" to (in this example) 50, use the following command.

update stgpool BACKUP_POOL maxscr=50

Date	Host	NA #Scratch/#vTapes	TSM #Allowed/#Max	#NodesDSS/Total	TSM Est Capacity	TSM Pct Util	NA Capacity Allocated	NA Capacity Used
05/27/2009 03:00PM	black0a	35/859	802/859	479/499	41,789G	50.8%	42,950G	18,563G
	golden0c	119/600	470/600	NA	28,553G	65.9%	30,000G	14,400G
change: blackeagle: set 'max scratch volumes allowed' to 700 from 850/859
05/28/2009 10:00 AM	black0a	39/859	799/700	479/499	38,852G	54.3%	42,950G	18,559G
	golden0c	119/600	470/600	NA	28,552G	65.7%	30,000G	14,509G
05/29/2009 10:00 AM	black0a	70/859	792/700	470/490	38,417G	54.9%	42,950G	18,588G
	golden0c	120/600	469/600	NA	28,552G	65.9%	30,000G	14,607G
change: blackeagle: set 'reclamation threshold' to 30% from 55%
change: blackeagle: set 'max scratch volumes allowed' to 600 from 700
06/01/2009 10:00 AM	black0a	174/859	665/600	???/???	32,155G	65.5%	42,950G	????G
	golden0c	116/600	473/600	NA	28,551G	67.0%	30,000G	???G
06/02/2009 10:00 AM	black0a	176/859	663/600	486/506	32,026G	66.1%	42,950G	17,379G
	golden0c	115/600	474/600	NA	28,551G	66.6%	30,000G	14,670G
06/05/2009 10:00 AM	black0a	180/859	659/600	491/511	31,787G	67.8%	42,950G	17,674G
	golden0c	113/600	484/600	NA	28,553G	68.3%	30,000G	14,942G
change: blackeagle: set 'reclamation threshold' to 15% from 30%
change: blackeagle: set 'max scratch volumes allowed' to 500 from 600
06/02/2009 10:00 AM	black0a	337/859	500/500	500/525	23,790G	90.4%	42,950G	16,866G
	golden0c	110/600	484/600	NA	28,550G	67.5%	30,000G	14,886G
change: blackeagle: set 'max scratch volumes allowed' to 520 from 500
06/12/2009 10:00 AM	black0a	314/859	519/520	512/542	24,712G	90.5%	42,950G	17,808G
	golden0c	109/600	479/600	NA	28,555G	68.2%	30,000G	14,839G
change: goldeneagle: set 'reclamation threshold' to 30% from 55%
change: goldeneagle: set 'max scratch volumes allowed' to 470 from 600
06/15/2009 10:00 AM	black0a	313/859	514/544	512/542	24,707G	90.8%	42,950G	17,942G
	golden0c	155/600	479/600	NA	22,321G	92.1%	30,000G	13,766G
change: golden and black eagle: set 'reclamation threshold' to 20% from 30%
change: blackeagle: set 'max scratch volumes allowed' to 550 from 520
change: goldeneagle: set 'max scratch volumes allowed' to 450 from 470
06/19/2009 10:00 AM	black0a	284/859	549/550	564/576	26,129G	90.4%	42,950G	19,001G
	golden0c	159/600	430/450	NA	21,357G	90.4%	30,000G	13,885G
change: blackeagle: set 'max scratch volumes allowed' to 620 from 560
06/29/2009 10:00 AM	black0a	255/859	580/580	581/589	27,485G	95.6%	42,950G	20,844G
	golden0c	164/600	425/450	NA	21,358G	89.1%	30,000G	13,544G
change: blackeagle: set 'max scratch volumes allowed' to 620 from 560
07/02/2009 02:00 PM	black0a	238/600	601/620	593/603	29,405G	96.9%	42,950G	21,420G
	golden0c	164/600	427/450	NA	21,357G	89.6%	30,000G	13,623G
08/13/2009 10:00 AM	black0a	164/859	660/700	682/721	31,269G	92.2%	42,950G	24,138G
	golden0c	145/600	435/450	NA	21,357G	90.0%	30,000G	14,270G
change: added another storage pool for both so need to start a new table?
09/10/2009 10:00 AM	black0a	???/???	600/731	727/764	34,639G	91.4%	44,450G	30,129G
	golden0c	???/???	300/410	NA	19,450G	87.4%	29,950G	17,724G
change: