This is an old revision of the document!
This is the template that the primary share owner will receive in order to get the process moving.
Our current platform to provide disk storage capacity for users and groups is called Flexstorage. In this model users and groups purchase storage as needed for backup, replication and/or snapshosts. Our next platform will be called Rstore (stands for remote or research storage) and in this model disk space is allocated to users and groups upon request. Both platforms are made up of lots of slow spinning disks and should not be relied on for performance.
You will use your Wesleyan Active Directory (AD) credentials, that is, the username/password combination used to access all other Wesleyan services. There will be two service addresses: rstore0.wesleyan.edu and rstore2.wesleyan.edu. These addresses are each backed with a pair of integrated storage and server modules (rstoresrv[0&1].wesleyan.edu for rstore0 and rstoresrv[2&3].wesleyan.edu for rstore2). The service addresses will point to the primary member of each pair. During a fail over event the secondary will become the primary and handle the traffic for that service address. The failed primary, after being fixed, will then resurface as secondary.
There are several ways to access your contents either by logging in or mounting the shares. More information is provided below with specifics for your share.
Each primary/secondary pair contain a /home directory that is kept in sync. This is solely for SSH access. Users quotas are very small (10 MB) and should only be used for scripts for example. Each primary/secondary's disk arrays is carved up in into four areas to hold shares (/data/1, /data/2, /data3 and /data/4). Shares will be distributed across the four 26 TB data filesystems allowing all shares room for growth.
The secondary members within each pair, nightly replicate any new data from the primary via a pulling action. Please note that if a file is missing on primary, the file will be deleted on secondary. The frequency of “pulling” is described as nightly but depending on volume of delta changes can span more than 24 hours, it is continuous. This happens for all four data filesystems.
Only the shares located on the third data filesystem (/data/3), in addition to replication, will perform snapshots. This happens on both primary and secondary, locally, from for example /data/3/share_name to /data/4/snapshots/share_name, and also happens nightly. Replication is duplicating data on primary member to be in sync with data on secondary member. In the event of a fail over, the contents are available on short notice, but if a file is corrupt or missing, it will be so on both members following a replication event. Snapshots are point-in-time comparisons of the share contents. This will be done nightly and snapshots will be kept for: 6 daily, 4 weekly, 2 monthly. Thus if a file is deleted or corrupt it can be restored. This only happens for shares on /data/3 while we can sustain such disk usage.
Note: Because of replication, large reorganizations of content areas (250+ gb or 10,000+ files) causes a lot of deletions first, then recopying. Please describe in detail what needs to be moved and we can perform those actions on primary and secondary avoiding this.
Note: For very large filesystems whose contents does not change, the replication can take a long time and is typically unnecessary. Share owners can control what gets replicated, or not, by staging a file in the top level share folder named rsync.incl or rsync.excl. The files contain lines of absolute paths to the folders to be either skipped or included only during replication. For example: /data/1/share_name/projects/2005 (do not use weird characters or spaces). An include file only replicates those folders, and exclude file replicates the whole share but skips the listed folders.
Your content is protected using these methods: