This is an old revision of the document!
Back
HP HPC
Notes for the cluster design conference with HP.
“do later” means we tackle after the HP on site visit.
S & H
Shipping Address: 5th floor data center
No 13'6“ truck, 12'6” is ok or box truck
Delivery on standard raised dock, no ways to lift rack out of truck if not docked
Freight Elevator and pallet jack available
Network
Basically …
x.y.z.255 is broadcast
x.y.z.254 is head or log in node
x.y.z.0 is gateway
x.y.z.<25 is for all switches and console ports
x.y.z.25( up to 253) is for all compute nodes
We are planning to ingest our Dell cluster (37 nodes) and our Blue Sky Studios cluster (130 nodes) into this setup, hence the approach.
Netmask is, finally, 255.255.0.0 (excluding public 129.133 subnet).
DM380G7
HP Link (head node)
hostname
greentail, another local “tail”, also in reference to HP being 18-24% more efficient in power/cooling
eth0, provision, 192.168.102.254/255.255.0.0 (greentail-eth0, should go to better switch ProCurve 2910)
eth1, data/private, 10.10.102.254/255.255.0.0 (greentail-eth1, should go to ProCurve 2610)
eth2, public, 129.133.1.226/255.255.255.0 (greentail.wesleyan.edu)
eth3, ipmi, 192.168.103.254/255.255.0.0, (greentail-ipmi, should go to better switch ProCurve 2910, do later)
ib0, ipoib, 10.10.103.254/255.255.0.0 (greentail-ib0)
ib1, ipoib, 10.10.104.254/255.255.0.0 (greentail-ib1, configure, might not have cables!, split traffic across ports?)
Raid 1 mirrored disks (2x250gb)
/home mount point for home directory volume ~ 10tb
/home/apps mount point for software volume ~ 1tb (contains /home/apps/src)
/home/sanscratch mount point for sanscratch volume ~ 5 tb
logical volume LOCALSCRATCH: mount at /localscratch ~ 100 gb (should match nodes at 160 gb, leave rest for
OS)
logical volumes ROOT/VAR/BOOT/TMP: defaults
StorageWorks MSA60
HP Link (storage device)
Systems Insight Manager (SIM)
HP Link
install, configure
requires an oracle install? np, hpsmdb is installed with automatic installation (postgresql)
linux deployment utilities
configure managed systems, automatic discovery
configure automatic event handling
SL2x170z G6
HP Link (compute nodes)
node names hp000, increment by 1
eth0, provision, 192.168.102.25(increment by 1)/255.255.0.0 (hp000-eth0, should go to better switch ProCurve 2910)
eth1, data/private, 10.10.102.25(increment by 1)/255.255.0.0 (hp000-eth1, should go to ProCurve 2610)
eth2, ipmi, 192.168.103.25(increment by 1)/255.255.0.0, (hp000-ipmi, should go to better switch ProCurve 2910, do later)
ib0, ipoib, 10.10.103.25(increment by 1)/255.255.0.0 (hp000-ib0)
ib1, ipoib, 10.10.104.25(increment by 1)/255.255.0.0 (hp000-ib1, configure, might not have cables!)
/home mount point for home directory volume ~ 10tb
/home/apps mount point for software volume ~ 1tb (contains /home/apps/src)
/home/sanscratch mount point for sanscratch volume ~ 5 tb
logical volume LOCALSCRATCH: mount at /localscratch ~ 100 gb (60 gb left for
OS)
logical volumes ROOT/VAR/BOOT/TMP: defaults
Misc
IPoIB
configuration, fine tune
monitor
Back