DokuWiki

The following script should be in your path … located in ~/bin

node2$ gpu-info
====================================================
Device  Model           Temperature     Utilization
====================================================
0       Tesla K20       27 C             0 %
1       Tesla K20       28 C             0 %
2       Tesla K20       27 C             0 %
3       Tesla K20       30 C             0 %
====================================================

Next we need to expose these GPUs to pmemd …

# expose one
export CUDA_VISIBLE_DEVICES="0"

# serial run of pmemd.cuda
nohup $AMBERHOME/bin/pmemd.cuda -O -i mdin -o mdout -p prmtop \
-c inpcrd -r restrt -x mdcrd </dev/null &

# expose multiple
export CUDA_VISIBLE_DEVICES="0,2"

# parallel run, note that you will need create the machinefile
# if -np=4 it would could contain 4 lines with the string 'localhost'
mpirun --machinefile=nodefile -np 4 $AMBERHOME/bin/pmemd.cuda.MPI \
-O -i mdin -o mdout -p prmtop \
-c inpcrd -r restrt -x mdcrd </dev/null &

Back